Seleziona il tipo di ricerca:

Torna alla pagina precedente TORNA CATALOGO / MODELLI STATICI / MONTATI / .4 AUTO IN SCALA 1/18 / ANSCMCM154

Articolo : ANSCMCM154 Disponibilità :  NonDisponibile  NonDisponibile
Prezzo : 479.00 €
Prezzo Web :    449.00 €
Il prodotto è stato inserito nel carrello!    


    FERRARI 250 GTO 1962      1/18

    FERRARI 250 GTO 1962      1/18   FERRARI 250 GTO 1962      1/18   FERRARI 250 GTO 1962      1/18
    FERRARI 250 GTO 1962 1/18

    ROSSA

    Fornitore

    Modello costruito a mano con 1841 singoli pezzi di cui 1215 sono in metallo.


    PRODUCT DESCRIPTION

    In March 1961, people at Ferrari were getting nervous. This was due to the imminent introduction of a new Jaguar E-Type at the Geneva Motor Show. The car was seen as a serious competitor, and Ferrari was very concerned about its supremacy in motor racing.
    Enzo Ferrari acted immediately, and he commissioned Giotto Bizzarrini to design a new GT-class car. Bizzarrini decided to work with the 250GT/SWB, a model that had proved its worth against tough tests. It was quite clear that little change, if any, was going to be made of the chassis, while the wheelbase would remain the same at 2,400 mm. Major modification that ensued involved the rear-axle, body aerodynamics, and center of gravity. In addition, an improved gear train was provided.


    The car obtained homologation with the new type designation of 250 GTO, where “O” stands for the Italian word “omologate” (homologated, certified). But because of a widely-known “internal coup” against Enzo Ferrari, several GTO designers, including Bizzarrini, had to leave the company.
    He was succeeded by Mauro Foghieri, who set to work together with the coachbuilder Sergio Scaglietti and completed the development project. The new GTO boasted a stunningly beautiful body, and it was presented to the international press at Maranello in February 1962.


    The racing debut of the GTO was at the 12 Hours of Sebring 1962 in the USA. Its driving duo Phil Hill and Olivier Gendebien won the GT-class and finished 2nd overall. From then on, the winning streak continued Ferrari clinched the constructors’ championship in 1962, 1963 and 1964 consecutively. A total of 39 GTO vehicles were built, including three equipped with a 4-liter engine.
    Welcome to a 250 GTO replica featuring CMC’s absolutely extraordinary craftsmanship. You have the option to choose between the silver, yellow, blue and red finishes according to your own preference.

    CMC Legal Disclaimer
    The use of racing team and/or driver names, symbols, starting numbers, and/or descriptions is solely for reference purposes. Unless otherwise stated, it does not imply that the CMC scale model is a product of any of these racing teams/drivers or endorsed by any of them.

    Model Description
    Hand-crafted metal precision model with a left-hand drive, built from 1,841 single parts, of which 1,215 are made of metal
    True-to-scale, authentic replication of the car body customized by the renowned coachbuilder Sergio Scaglietti
    Elegantly-replicated front end with removable covers of the three air intakes
    One coolant filler under a flip-open cover in the bonnet one oil-tank filler housed under the right side of the rear window with an openable cover
    Intricate windscreen-wipers with real rubber blades
    Functional engine hood, equipped with a supporting rod, functional locks for quick release, and leather belts and buckles for secure fastening
    Functional doors with sliding windows
    Trunk lid has a supporting rod and opens to reveal a spare wheel
    Rear fuel tank filler with a flip-open cap
    Perfectly-wired wheels with a light alloy rim, stainless steel spokes and nipples
    Unscrew the Borrani central locking nuts (with side-dependent right- and left-hand threads) to remove the wheels
    Highly detailed 12-cylinder V-type engine, complete with all aggregates, pipes and cabling
    Meticulous replication of the interior and its racing accessories, such as roll cage and safety belts. Seats upholstered in real textile covers with leather trimmimgs
    Well-integrated dashboard with a full array of instruments and controls on a wrinkle-finish-paint surface
    Elaborate undercarriage that reveals authentically-replicated front and rear suspensions, oil tank for dry sump lubrication, and fuel tank (all being made of stainless steel) in addition to an impressive racing-style tailpipe of the exhaust system.
    Detachable stainless-steel bottom plate, and a brilliant high-gloss finish


    Special feature: 3 lockable covers for the additional air intakes above the radiator grille, also removable if needed.

    TECHNICAL DATA OF THE ORIGINAL VEHICLE:

    Two-seater coupé body (Berlinetta) made of aluminum on a tubular frame with side trellis-frame reinforcement

    12-cylinder V-engine with a 60° cylinder angle and dual overhead camshafts

    Dry sump lubrication

    Bore x stroke: 73 x 58.8 mm
    Displacement: 2,953 cc
    Compression: 9.8 : 1
    Maximum output: 300 hp at 7,500 rpm
    Top speed: Approx. 280km/h
    Mixture preparation: 6x Weber 38 DCN-dual carburetor
    Transmission: Synchronized 5-speed manual rear-wheel drive
    Suspension: Front independent suspension on trapezoidal whishbones with coil springs rear rigid axle with longitudinal leaf springs, Koni shock absorbers, and Watt linkage
    Brakes: Disk-brakes all around
    Wheelbase: 2,400 mm
    Track front/rear: 1,354 (1,351) / 1,350 (1,346) mm
    Vehicle length / wide / height: 4,325 / 1,600 / 1,210 mm
    Curb weight: Approx. 900 kg
    Construction period / quantity: 1962-1964 / 36 pcs. + 3 units with a 4-liter-engine


    Barcode 2010229001540


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 


    Metti in osservazione il prodotto
    e avvisami quando torna ad essere
    disponibile
    Stai osservando questo prodotto. Riceverai una mail non appena il prodotto sarà disponibile

    FERRARI 250 GTO 1962      1/18
    Technical Data of the Original Vehicle:
    Two-seater coupé body (Berlinetta). 12-cylinder V-engine with a
    60° cylinder angle and dual overhead camshafts
    Maximum output: 300 hp at 7,500 rpm
    Bore x stroke: 73 x 58.8 mm
    Displacement: 2,953 ccm
    Compression: 9.8 : 1
    Top speed: approx. 280 Km/h
    Wheel base: 2,400 mm
    Track front / rear: 1,354 (1,351) / 1,350 (1,346) mm
    Vehicle length / wide / height: 4,325 / 1,600 / 1,210 mm
    Curb weight: approx. 900 kg
    Period / Quantity: 1962-1964 / 36 pcs. + 3 with a 4-liter-engine


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    FERRARI 250 GTO 1962 1/18

    ROSSA

    Fornitore

    Modello costruito a mano con 1841 singoli pezzi di cui 1215 sono in metallo.


    PRODUCT DESCRIPTION

    In March 1961, people at Ferrari were getting nervous. This was due to the imminent introduction of a new Jaguar E-Type at the Geneva Motor Show. The car was seen as a serious competitor, and Ferrari was very concerned about its supremacy in motor racing.
    Enzo Ferrari acted immediately, and he commissioned Giotto Bizzarrini to design a new GT-class car. Bizzarrini decided to work with the 250GT/SWB, a model that had proved its worth against tough tests. It was quite clear that little change, if any, was going to be made of the chassis, while the wheelbase would remain the same at 2,400 mm. Major modification that ensued involved the rear-axle, body aerodynamics, and center of gravity. In addition, an improved gear train was provided.


    The car obtained homologation with the new type designation of 250 GTO, where “O” stands for the Italian word “omologate” (homologated, certified). But because of a widely-known “internal coup” against Enzo Ferrari, several GTO designers, including Bizzarrini, had to leave the company.
    He was succeeded by Mauro Foghieri, who set to work together with the coachbuilder Sergio Scaglietti and completed the development project. The new GTO boasted a stunningly beautiful body, and it was presented to the international press at Maranello in February 1962.


    The racing debut of the GTO was at the 12 Hours of Sebring 1962 in the USA. Its driving duo Phil Hill and Olivier Gendebien won the GT-class and finished 2nd overall. From then on, the winning streak continued Ferrari clinched the constructors’ championship in 1962, 1963 and 1964 consecutively. A total of 39 GTO vehicles were built, including three equipped with a 4-liter engine.
    Welcome to a 250 GTO replica featuring CMC’s absolutely extraordinary craftsmanship. You have the option to choose between the silver, yellow, blue and red finishes according to your own preference.

    CMC Legal Disclaimer
    The use of racing team and/or driver names, symbols, starting numbers, and/or descriptions is solely for reference purposes. Unless otherwise stated, it does not imply that the CMC scale model is a product of any of these racing teams/drivers or endorsed by any of them.

    Model Description
    Hand-crafted metal precision model with a left-hand drive, built from 1,841 single parts, of which 1,215 are made of metal
    True-to-scale, authentic replication of the car body customized by the renowned coachbuilder Sergio Scaglietti
    Elegantly-replicated front end with removable covers of the three air intakes
    One coolant filler under a flip-open cover in the bonnet one oil-tank filler housed under the right side of the rear window with an openable cover
    Intricate windscreen-wipers with real rubber blades
    Functional engine hood, equipped with a supporting rod, functional locks for quick release, and leather belts and buckles for secure fastening
    Functional doors with sliding windows
    Trunk lid has a supporting rod and opens to reveal a spare wheel
    Rear fuel tank filler with a flip-open cap
    Perfectly-wired wheels with a light alloy rim, stainless steel spokes and nipples
    Unscrew the Borrani central locking nuts (with side-dependent right- and left-hand threads) to remove the wheels
    Highly detailed 12-cylinder V-type engine, complete with all aggregates, pipes and cabling
    Meticulous replication of the interior and its racing accessories, such as roll cage and safety belts. Seats upholstered in real textile covers with leather trimmimgs
    Well-integrated dashboard with a full array of instruments and controls on a wrinkle-finish-paint surface
    Elaborate undercarriage that reveals authentically-replicated front and rear suspensions, oil tank for dry sump lubrication, and fuel tank (all being made of stainless steel) in addition to an impressive racing-style tailpipe of the exhaust system.
    Detachable stainless-steel bottom plate, and a brilliant high-gloss finish


    Special feature: 3 lockable covers for the additional air intakes above the radiator grille, also removable if needed.

    TECHNICAL DATA OF THE ORIGINAL VEHICLE:

    Two-seater coupé body (Berlinetta) made of aluminum on a tubular frame with side trellis-frame reinforcement

    12-cylinder V-engine with a 60° cylinder angle and dual overhead camshafts

    Dry sump lubrication

    Bore x stroke: 73 x 58.8 mm
    Displacement: 2,953 cc
    Compression: 9.8 : 1
    Maximum output: 300 hp at 7,500 rpm
    Top speed: Approx. 280km/h
    Mixture preparation: 6x Weber 38 DCN-dual carburetor
    Transmission: Synchronized 5-speed manual rear-wheel drive
    Suspension: Front independent suspension on trapezoidal whishbones with coil springs rear rigid axle with longitudinal leaf springs, Koni shock absorbers, and Watt linkage
    Brakes: Disk-brakes all around
    Wheelbase: 2,400 mm
    Track front/rear: 1,354 (1,351) / 1,350 (1,346) mm
    Vehicle length / wide / height: 4,325 / 1,600 / 1,210 mm
    Curb weight: Approx. 900 kg
    Construction period / quantity: 1962-1964 / 36 pcs. + 3 units with a 4-liter-engine


    Barcode 2010229001540


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
I prezzi scontati sono validi solo per prenotazioni o acquisti On-Line

Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.


Modellismo Gianni - Via Pier Vittorio Aldini n.41   Roma (Uscita G.R.A. Ciampino Zona Industriale)
Tel. 06/72673332 • Fax. 06/72677092 • P. IVA 04563861006 • Mail: info@modellismogianni.it © Modellismo Gianni 2007
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01
PAGAMENTI :     CONSEGNE IN 24/48 ORE :

 webmaster : Massimo Marra