Seleziona il tipo di ricerca:

Torna alla pagina precedente TORNA CATALOGO / ATTREZZATURA MODELLISTICA / COLLANTI / .2 EPOXY E RESINE BICOMPONENTI / CNDMPO-S25-BK

Articolo : CNDMPO-S25-BK Disponibilità :  Ottima  Ottima
Prezzo : 19.90 €
Prezzo Web :    16.90 €
Quantità :
Il prodotto è stato inserito nel carrello!    


    EPOXY 5 MINUTI            25gr

    EPOXY 5 MINUTI            25gr   EPOXY 5 MINUTI            25gr   EPOXY 5 MINUTI            25gr
    EPOXY 5 MINUTI 25gr

    Fornitore

    MD POX is a highly reactive two-component epoxy adhesive for bonding metal, ceramic, glass, stone, wood, hard plastics. It is suitable for many on-the-spot repairs with high quality and little effort. Easy handling thanks to the automatically regulated two-injection system. MD POX remains stiff-flexible and can therefore guarantee permanent rigidity in case of impacts or vibration. Temperature resistance: -40 °C to +80 °C. Application temperature: +10 °C to +30 °C. Final hardening: 24 hours. Pot life: approx. 5 minutes. Do not work at outdoor temperatures below 5 °C. Instructions for use: The surfaces to be glued are to be thoroughly cleaned with a good degreaser. Excellent results are obtained if the surface is first mechanically roughened. Remove cap by twisting, place mixing nozzle on and tighten. Press material out and dispose of the first 2 g as it has yet not been mixed 1:1. The setting time is shortened with high temperatures. Place work pieces together and fix. Remove and dispose of mixing nozzle. Replace cap. Store opened cartridge in a cool place and use up as quickly as possible.

    Barcode 4016673006979


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    EPOXY 5 MINUTI            25gr
    Physical properties (in liquid state)
    Color (mixed): transparent
    Viscosity (mixed) @ +25 °C: 15.000-30.000 mPa-s
    Mixing ratio: 1:1
    Processing time: ca. 5 min
    Curing time: 48 h
    Temperature resistance: -40 °C bis +80 °C
    ASTM D1002 after 72 h @ 25 °C
    Steel: 18-22 N/mm²
    Stainless steel: 10-12 N/mm²
    Aluminium: 6-8 N/mm²
    Polycarbonate: 5-8 N/mm²
    PVC: 5-8 N/mm²


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    EPOXY 5 MINUTI 25gr

    Fornitore

    MD POX is a highly reactive two-component epoxy adhesive for bonding metal, ceramic, glass, stone, wood, hard plastics. It is suitable for many on-the-spot repairs with high quality and little effort. Easy handling thanks to the automatically regulated two-injection system. MD POX remains stiff-flexible and can therefore guarantee permanent rigidity in case of impacts or vibration. Temperature resistance: -40 °C to +80 °C. Application temperature: +10 °C to +30 °C. Final hardening: 24 hours. Pot life: approx. 5 minutes. Do not work at outdoor temperatures below 5 °C. Instructions for use: The surfaces to be glued are to be thoroughly cleaned with a good degreaser. Excellent results are obtained if the surface is first mechanically roughened. Remove cap by twisting, place mixing nozzle on and tighten. Press material out and dispose of the first 2 g as it has yet not been mixed 1:1. The setting time is shortened with high temperatures. Place work pieces together and fix. Remove and dispose of mixing nozzle. Replace cap. Store opened cartridge in a cool place and use up as quickly as possible.

    Barcode 4016673006979


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
I prezzi scontati sono validi solo per prenotazioni o acquisti On-Line

Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.


Modellismo Gianni - Via Pier Vittorio Aldini n.41   Roma (Uscita G.R.A. Ciampino Zona Industriale)
Tel. 06/72673332 • Fax. 06/72677092 • P. IVA 04563861006 • Mail: info@modellismogianni.it © Modellismo Gianni 2007
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01
PAGAMENTI :     CONSEGNE IN 24/48 ORE :

 webmaster : Massimo Marra