Seleziona il tipo di ricerca:

Torna alla pagina precedente TORNA CATALOGO / MODELLI DINAMICI / AEREI A SCOPPIO / .3 MAXY MODELLI / HORHAN4925

Articolo : HORHAN4925 Disponibilità :  NonDisponibile  NonDisponibile
Prezzo : 499.00 €
Il prodotto è stato inserito nel carrello!    


    INVERZA 33               190cm

    INVERZA 33               190cm   INVERZA 33               190cm   INVERZA 33               190cm
    INVERZA 33 190cm

    PER MOTORI 30-35cc

    Fornitore

    From a project that began as a “what if” with acclaimed full-scale builder Kevin Kimball and Quique Somenzini, the Inverza is a contemporary concept designed to harness the power of the radial engine with the potential only possible in a monoplane platform. For the finishing touches, Mirco Pecorari shared his expertise by complementing the modern concept with a stunning color scheme.

    Although the full scale Jim Kimball Enterprises Inverza™ airplane is yet to be built, you can enjoy the most balanced aircraft ever to be introduced for the aerobatics community. The Hangar 9® Inverza 33 aerobat has been developed to take advantage of both the emerging 30cc gas engine and 180-class outrunner electric power system popularity. Designed by the master, Quique Somenzini, whose pursuit of precision elevated him through the Extra and Yak aircraft series, the new Inverza concept promises to become his next great contribution. With its modern outline and features, the Inverza offers “no compromise” precise aerobatic capability for both scale aerobatics and aggressive 3D. Its massive control surfaces and generous wing area makes it very stable and predictable during the most demanding 3D maneuvers such as those that occur at slow speed, or while in a hover. The design also takes advantage of all the previous designs Quique worked with before making the Inverza not only a new benchmark in precision, but also an evolutionary step toward achieving an aircraft with balanced maneuverability. When setup correctly, no matter what attitude the Inverza is flown, very little to no control coupling is evident whether the maneuver is upright, inverted or knife-edge. The result is a flight experience that’s pure even when you’re control input is aggressive.

    Covered in genuine UltraCote®, its balsa/balsa-plywood structure is strong and light, while Mirco Pecorari’s original color scheme offers stunning looks, incredible ground presence and high visibility in the air. Its two-piece wing connects with a carbon fiber wing tube and the ailerons and elevators are pre-hinged with a tight seal so you can get flying faster. The oversized hatch features a tinted canopy, scale instrument detail and an ideal location for the pilot figure of your choice. Other great features include a factory painted aluminum landing gear, plus a factory painted fiberglass cowl and matching wheel pants.

    Power it with the Evolution® Engines 33GX 30cc gas engine, the Inverza 33 is ideal for entry-level aerobatic pilots and giant-scale fans looking to modernize with a sensibly sized airframe bursting with performance. For those who prefer electric, the E-flite® Power 180 outrunner on a 10S Li-Po battery system can deliver unbridled performance.

    Barcode 0605482071861


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 


    Metti in osservazione il prodotto
    e avvisami quando torna ad essere
    disponibile
    Stai osservando questo prodotto. Riceverai una mail non appena il prodotto sarà disponibile

    INVERZA 33               190cm
    Product Specifications

    Wingspan: 75.0 in (190 cm)
    Overall Length: 72.0 in (183 cm)
    Wing Area: 1120 sq. in. (72.5 sq. dm.)
    Flying Weight: 12.3-13.0 lb (5.60-5.90 kg)
    Engine Size: 30-35cc 2-stroke gas
    Motor Size: Power 180
    Radio: 6+ channel radio system
    Servos: (5) high-torque standard servos, (1) standard servo
    Trim Scheme Colors: UltraCote Bright Yellow (U872), Sky Blue (U875), Midnight Blue (U885)
    CG (center of gravity): 5.51-5.71 in (140-145mm) back from leading edge of wing at wing root
    Wing Loading: 25.1 oz/sq ft (76.6 g/sq dm)
    Prop Size: 18 x 8 (Evolution 33cc gas), 22 x 10E (Power 180)
    Spinner Size: 3.0 in (76mm) P-51 style
    Speed Control : 80+ amp high-voltage brushless ESC
    Recommended Battery: 37.0V 10S 4400-5000mAh Li-Po pack
    Control Throw (Ailerons): Low: 50mm up/down, 40% expo High: 95mm up/down, 45% expo
    Control Throw (Rudder): Low: 15mm right/left, 15% expo High: 40mm right/left, 40% expo
    Minimum Age Recommendation: 14 years
    Experience Level: Advanced
    Recommended Environment: Outdoor
    Assembly Time: 15-20 Hours
    Is Assembly Required: Yes
    Control Throw (Elevator): Low: 8mm up/down, 20% expo High: 50mm up/down, 45% expo

    Needed to Complete

    Radio Equipment
    - 6+ channel programmable transmitter
    - 6+ channel receiver
    - (5) high-torque standard servos

    Gas Setup
    - 30-35cc 2-stroke gas engine
    - Propeller
    - Spinner
    - Standard servo (for throttle)
    - Chargeswitch
    - Ignition pack
    - Receiver pack
    - Pilot figure (optional)

    Electric Setup
    - Power 180 motor
    - EP motor mount (HAN492515)
    - 80+ amp high-voltage brushless ESC
    - BEC
    - Propeller
    - Spinner
    - 37.0V 10S 4400-5000mAh flight pack
    - Charger for flight pack
    - Pilot figure (optional)


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    INVERZA 33 190cm

    PER MOTORI 30-35cc

    Fornitore

    From a project that began as a “what if” with acclaimed full-scale builder Kevin Kimball and Quique Somenzini, the Inverza is a contemporary concept designed to harness the power of the radial engine with the potential only possible in a monoplane platform. For the finishing touches, Mirco Pecorari shared his expertise by complementing the modern concept with a stunning color scheme.

    Although the full scale Jim Kimball Enterprises Inverza™ airplane is yet to be built, you can enjoy the most balanced aircraft ever to be introduced for the aerobatics community. The Hangar 9® Inverza 33 aerobat has been developed to take advantage of both the emerging 30cc gas engine and 180-class outrunner electric power system popularity. Designed by the master, Quique Somenzini, whose pursuit of precision elevated him through the Extra and Yak aircraft series, the new Inverza concept promises to become his next great contribution. With its modern outline and features, the Inverza offers “no compromise” precise aerobatic capability for both scale aerobatics and aggressive 3D. Its massive control surfaces and generous wing area makes it very stable and predictable during the most demanding 3D maneuvers such as those that occur at slow speed, or while in a hover. The design also takes advantage of all the previous designs Quique worked with before making the Inverza not only a new benchmark in precision, but also an evolutionary step toward achieving an aircraft with balanced maneuverability. When setup correctly, no matter what attitude the Inverza is flown, very little to no control coupling is evident whether the maneuver is upright, inverted or knife-edge. The result is a flight experience that’s pure even when you’re control input is aggressive.

    Covered in genuine UltraCote®, its balsa/balsa-plywood structure is strong and light, while Mirco Pecorari’s original color scheme offers stunning looks, incredible ground presence and high visibility in the air. Its two-piece wing connects with a carbon fiber wing tube and the ailerons and elevators are pre-hinged with a tight seal so you can get flying faster. The oversized hatch features a tinted canopy, scale instrument detail and an ideal location for the pilot figure of your choice. Other great features include a factory painted aluminum landing gear, plus a factory painted fiberglass cowl and matching wheel pants.

    Power it with the Evolution® Engines 33GX 30cc gas engine, the Inverza 33 is ideal for entry-level aerobatic pilots and giant-scale fans looking to modernize with a sensibly sized airframe bursting with performance. For those who prefer electric, the E-flite® Power 180 outrunner on a 10S Li-Po battery system can deliver unbridled performance.

    Barcode 0605482071861


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
I prezzi scontati sono validi solo per prenotazioni o acquisti On-Line

Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.


Modellismo Gianni - Via Pier Vittorio Aldini n.41   Roma (Uscita G.R.A. Ciampino Zona Industriale)
Tel. 06/72673332 • Fax. 06/72677092 • P. IVA 04563861006 • Mail: info@modellismogianni.it © Modellismo Gianni 2007
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01
PAGAMENTI :     CONSEGNE IN 24/48 ORE :

 webmaster : Massimo Marra