Seleziona il tipo di ricerca:

Torna alla pagina precedente TORNA CATALOGO / ACCESSORI RC / MOTORI ELETTRICI / .4 BRUSHLESS OUTRUNNER X IL VOLO / SCO-EFLM1130

Articolo : SCO-EFLM1130 Disponibilità :  Scarsa  PochiPz.
Prezzo : 34.70 €
Quantità :
Il prodotto è stato inserito nel carrello!    


    MOTORE BRUSHLESS PARK 250

    MOTORE BRUSHLESS PARK 250   MOTORE BRUSHLESS PARK 250   MOTORE BRUSHLESS PARK 250
    MOTORE BRUSHLESS PARK 250

    2200Kv OUTRUNNER

    Fornitore

    Park 250 Brushless Outrunner Motor 2200Kv

    Key Features
    Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
    Up to 55 watts
    Designed for firewall mount or carbon tube mount
    Integrated Prop Saver design
    Extremely quiet and lightweight—just .5 ounces (14 grams)
    Upgraded performance motor for indoor IPS and 180 motors
    High-torque, direct-drive alternative to inrunners
    Includes mount, mounting hardware and 2mm gold BL connectors
    High-quality construction with ball bearings and hardened steel shaft
    Great lightweight outrunner for small indoor foamies
    Overview
    Ideal for 3D models 4–6 oz (115–170 g), and sport and scale models 6–12 oz (170–340 g) or models requiring up to 55 watts of power.

    Needed to Complete
    6–10A brushless ESC
    2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH
    5.5 x 4.5–8 x 6 Slow Flyer prop


    Barcode 0605482587416


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    MOTORE BRUSHLESS PARK 250
    Specs
    Type: Brushless outrunner
    Size: Upgrade for 180-size
    Bearings or Bushings: Two 2 x 5 x 2.5mm Bearings
    Recommended Prop Range: 5.5 x 4.5–8 x 6 Slow Flyer
    Voltage: 6–8.4V
    RPM/Volt (Kv): 2200
    Resistance (Ri): .25 ohms
    Idle Current (Io): .45A
    Continuous Current: 7A
    Maximum Burst Current: 8A (15 sec)
    Cells: 6 Ni-MH/Ni-Cd or 2 Li-Po
    Speed Control: 6A–10A brushless
    Weight: 14 g (0.5 oz)
    Overall Diameter: 22mm (.85 in)
    Overall Length: 23mm (.90 in)

    Needed to Complete
    6–10A brushless ESC

    2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH

    5.5 x 4.5–8 x 6 Slow Flyer prop

    Tech Notes
    Maximum operating temperature: 220 degrees Fahrenheit.

    Adequate cooling is required for all motor operation at maximum current levels.

    Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.




    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    MOTORE BRUSHLESS PARK 250

    2200Kv OUTRUNNER

    Fornitore

    Park 250 Brushless Outrunner Motor 2200Kv

    Key Features
    Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
    Up to 55 watts
    Designed for firewall mount or carbon tube mount
    Integrated Prop Saver design
    Extremely quiet and lightweight—just .5 ounces (14 grams)
    Upgraded performance motor for indoor IPS and 180 motors
    High-torque, direct-drive alternative to inrunners
    Includes mount, mounting hardware and 2mm gold BL connectors
    High-quality construction with ball bearings and hardened steel shaft
    Great lightweight outrunner for small indoor foamies
    Overview
    Ideal for 3D models 4–6 oz (115–170 g), and sport and scale models 6–12 oz (170–340 g) or models requiring up to 55 watts of power.

    Needed to Complete
    6–10A brushless ESC
    2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH
    5.5 x 4.5–8 x 6 Slow Flyer prop


    Barcode 0605482587416


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
I prezzi scontati sono validi solo per prenotazioni o acquisti On-Line

Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.


Modellismo Gianni - Via Pier Vittorio Aldini n.41   Roma (Uscita G.R.A. Ciampino Zona Industriale)
Tel. 06/72673332 • Fax. 06/72677092 • P. IVA 04563861006 • Mail: info@modellismogianni.it © Modellismo Gianni 2007
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01
PAGAMENTI :     CONSEGNE IN 24/48 ORE :

 webmaster : Massimo Marra